1. To help enterprises better understand and satisfy the CCC factory inspection requirements or CQC factory inspection requirements
-- help enterprises to better understand and meet the implementation rules of CCC products or the implementation rules of CQC certification products
-- to help enterprises better understand and meet the requirements of the CCC factory inspection operation instructions or the CCC factory inspection work instruction requirements.
-- help enterprises to pass the factory inspection or annual inspection of the factory.
-- to help enterprises avoid disqualification during factory inspection or annual supervision and inspection.
-- help enterprises to save valuable time through factory inspection or annual factory supervision and inspection.
-- help companies avoid excessive waste of manpower, material resources or financial resources for factory inspection.
Our company mainly serves CCC&CQC factory inspection and guidance service project.
We have several CCC&CQC factory inspection training instructors, rich experience, has dozens of factory inspection successful coaching experience both at home and abroad, and has obtained the national CCC factory inspector training, also obtained the ISO9001:2008 certification training, and we keep good cooperative relations with many domestic CQC and nearly 10 years of experience in training, can be a one-time through the factory inspection for the enterprise.
Our company solemnly promises: all our factory inspection and guidance customers guarantee 100% pass, not through no charge!!
2. Check common problems in CCC&CQC factory.
What is the responsibility of a quality manager?
A: it is responsible for establishing the quality system that satisfies the text file and ensuring that it is and is maintained;
To ensure that the products of the certification mark are in conformity with the requirements of certification standards;
To establish documented procedures to ensure the proper use of certification and certification marks and to keep them properly;
The establishment of a documented procedure to ensure that the non-conforming product and the altered product are not confirmed by the certification authority without affixing the voluntary certification mark;
2. What is consistency and consistency?
A: consistency is consistent with the first product to be certified.
The scope of the consistency is: the supplier's consistency, the model and specification of the parts, the product's logo, the product structure and the factory address should be consistent;
Iii. How to use CQC logo?
A: the CQC logo of the company is printed and recorded in the future use. The CQC logo is not allowed to be used within the scope of certification, but it can not be used.
Iv. Treatment of unqualified products.
A: to identify the unqualified products;
The products of the defective products shall be reworked and qualified after rework.
5. What is "periodic confirmation test"?
Once a year, you should ask the supplier for a test report or a test report from a third party.
What is "confirmation test"?
Answer: entrust a third party to inspect the product of authentication, check whether the product of certification is consistent national standard.
7. What is "run check"?
A: before testing the product, the test equipment is calibrated. If the operation is not qualified, the reactor can be checked and checked together, and it can be put into use before being qualified.
8. What is "routine inspection"
A: the 100 percent inspection on the production line is called routine inspection.
Ix. The national execution standard of products (GB XXXXX)
10. If the factory fails to pass the inspection, it shall suspend the certificate of application for suspension.
The resume of the CCC document is based on the certification implementation rules (including quality manual, procedure documents, inspection documents, rules and regulations, operating procedures, etc.)
12. The contents of the certification archives include CCC certificate, type test report, factory inspection not conforming to the report, and confirming inspection report.
13. Internal audit: conduct internal audit to check whether the internal operation conforms to the factory's quality assurance ability, and cannot review its own department.
14. Incoming inspection: check three times for incoming goods.
3. Factory inspection contents:
1. Documents required by factory inspection.
1, the first factory inspection factory inspection, the factory need to prepare the following documents ready for the inspection company organization chart of quality control flow chart of production flow chart of product change QC flow chart or files and key positions and personnel training record incoming inspection related files (standard, wi) process (production) test related documents of outgoing inspection documents nonconforming control equipment management related documents
2, the annual factory inspection annual factory inspection data and examination of the need to prepare in the same process and factory inspection for the first time, but the annual factory inspection must be carried out product consistency check, the factory need to submit required consistency check file
Ii. Factory inspection content.
1. Organization and quality system: the position, responsibility and work situation of the quality department in the factory, personnel situation (the actual cognition and operation of QC personnel and key station).
2, incoming inspection: the inspection conditions (environment, equipment, metrology, calibration and personnel), inspected items, qualified products and scrap heap - incoming inspection and the implementation (work instructions, including standard and sampling AQL level, simple method and judging basis, operation ability, test records, judgement and release), and supplier audit.
3, warehouse, warehouse conditions (machine) and zero parts, components and finished goods storage and identification, the preservation of the finished product and deliver the collar material process, over the control file, BOM file (parts list).
4, the production process: important posts wi and personnel operating situation, nonconforming product identification and traceability of production process, the processing of inspection personnel's work instruction and the original record.
5. Routine inspection: operation instruction and personnel operation condition and test record, measurement/calibration of safety test equipment and daily functional test record.
6. Sampling inspection and sampling inspection (sampling standard, AQL level and inspection method) of sampling inspection before shipment.
7. Equipment inspection: safety test equipment account, calibration certificate of main equipment -- methods and records of internal calibration.
8, certification product consistency test (the first factory inspection) : establish certification product consistency control procedures, product structure, safety components and materials, including trademark, model and technical parameter of the nameplate and identity change, warnings on the manual change approval), establish certification product inspection procedures.
9. Internal audit: the enterprise must conduct internal review within one cycle, and the content must be covered by "consistency review".
10. Use of logo: the logo control, use, storage and inventory of CCC&CQC shall have the account and procedure, and the certificate shall be properly kept.
+86 18606998661
